TS14XA01 REPAIR KIT TYP-SVIZ-14 for TC260 / TC240

Replacement board for TRUMPF TC260R punch presses and similar (TC240R, TC260R) or Laser Combination punch presses

The spare part is used when the LEDs in the Linear amplifier card do not light up correctly. 

In 99% of the cases it is enough to replace this defective component, and replace it with ours, without having to replace or overhaul the whole linear amplifier, with very high costs.

Even in case the machine struggles to punch large thicknesses (for example the 3mm), there are good chances that the cause is the malfunction of this board (even if the machine does not detect errors).

The error that appears when the card no longer works is: MACHINE ERROR 18 - SLIT GROUP NOT READY

We supply the replacement board with first quality components.

This KIT allows to save between 6.000 and 12.000 euro required for the overhaul or replacement of the assembly of the linear amplifier that controls the punch.

The replacement kit is provided with a manual for simple assembly, but we always recommend an expert technician or electrician for the assembly

Many customers have also noticed improvements in the maximum workable thickness after the upgrade.

This is because the electrical connection is better and therefore more stable during strong vibrations due to the punching of the sheet metal.

The kit is therefore also suitable for machines that are still working, to improve their performance and to prepare in time for future malfunctions.

It is therefore also a good idea to keep a kit to prevent future machine downtime. 

Exclusion of liability.

Under no circumstances can typ-sviz-14-repair.online be held responsible for any damage caused by incorrect product assembly.

Before switching on the machine it is necessary to do a voltage check with a normal tester.

Shipping 

Fast shipping in 1 or 2 days to restore the functionality of the punching machine in a short time.